APN Settings

Bell MTS APN Settings – For Android, iPhone, And Windows

If you have been trying to send and receive messages, emails, and use the internet but could not, there are high chances that your APN settings have been disturbed or maybe they have not been saved. So, if you are dealing with the same issues, we can relate to you and if you are using Proximus service provider. If this is the case and you are the Bell.MTS network user, this article is for you because we have talked about Bell.MTS APN Settings – For Android, iPhone, And Windows to make sure that your mobile is connected to the internet. So, let’s just get to the point then!

Bell.MTS APN Settings for Android

If you are an Android user using the Bell.MTS mobile network, this section is for you because we have added the APN settings along with a step-by-step guideline which you can use to get your phone connected to the internet.

  1. In the first step, go to the settings from your phone’s menu and choose the “wireless & network”
  2. Once you have chosen the above option, go to the mobile networks and then finally choose the option “APN” and add the following details;

Bell.MTS APN SETTINGS

NAMEBell.MTS
APNsp.mts
Proxy:Not set
Port:Not set
Username:Not set
Password:Not set
Server:Not set
MMSC:http://mmsc2.mts.net/
MMS Proxy:wapgw1.mts.net
MMS Port: 9401
MCC:302
MNC:660
Authentication Type:Not set
APN Type:default, supl, mms
APN Protocol:Ipv4
APN Roaming Protocol:Ipv4
Enable/Disable APN:APN Enabled
Bearer:unspecified

Now, just save the details and you will be able to use the internet!

Bell.MTS APN Settings for iPhone

In this section, we have discussed the APN Settings for the iPhone users who are using the Bell.MTS mobile network. It is advised to follow the guidelines accurately to make sure you are connected to the internet.

  1. Go to the settings and choose the option “mobile data” or “cellular data”
  2. Now, tap in the following details;

Bell.MTS APN SETTINGS

NAMEBell.MTS
APNsp.mts
Proxy:Not set
Port:Not set
Username:Not set
Password:Not set
Server:Not set
MMSC:http://mmsc2.mts.net/
MMS Proxy:wapgw1.mts.net
MMS Port: 9401
MCC:302
MNC:660
Authentication Type:Not set
APN Type:default, supl, mms
APN Protocol:Ipv4
APN Roaming Protocol:Ipv4
Enable/Disable APN:APN Enabled
Bearer:unspecified

After adding these details, save them and you will be connected to the internet.

Bell.MTS APN Settings for Windows

In this section, we have added the step-by-step guidelines for the Windows users who are using the Bell.MTS mobile network and are unable to use the internet. With our guidelines, you will be able to connect to the internet by entering the APN settings in the specific compartments. So, let’s just start with it!

  1. In the first step, go to the settings and then choose the “network & wireless” option
  2. In the second step, go to the “mobile+SIM” and then choose the SIM settings
  3. In the SIM settings, go to the APN and add the following details;

Bell.MTS APN SETTINGS

NAMEBell.MTS
APNsp.mts
Proxy:Not set
Port:Not set
Username:Not set
Password:Not set
Server:Not set
MMSC:http://mmsc2.mts.net/
MMS Proxy:wapgw1.mts.net
MMS Port: 9401
MCC:302
MNC:660
Authentication Type:Not set
APN Type:default, supl, mms
APN Protocol:Ipv4
APN Roaming Protocol:Ipv4
Enable/Disable APN:APN Enabled
Bearer:unspecified

Now, just save the details and you will be able to use the internet!

This was all about Bell.MTS APN Settings – For Android, iPhone, And Windows and we hope that it helped you to the best. If you still have some issues, we can help you with that if you make the comment and our team will get back to you for helping you out. Thank you!

Show More

Seerat Ul Qamar

I have a knack for writing about tech and with my articles, you are sure to have some roller-coaster ride about the tech knowledge!

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close